D-Link DWR-978 - PPPoE Advanced Settings

24D-Link DWR-978 User Manual
Section 3 - Conguration
PPPoE Advanced Setting
Internet
Connection:
Specify the type of IPv6 connection your ISP uses. Choose from
Local Connectivity Only, Static IPv6, Auto Conguration
(Stateless/DHCPv6), PPPoE, 6rd.
PPPoE Session: Select the PPPoE Session to create or edit.
Username: Specify the Username.
Password: Specify the Password.
Address Mode: Specify the Reconnect Mode. Choose from Dynamic IP or Static
I P.
Service Name: Specify the Service Name.
Reconnect Mode: Specify the Reconnect Mode. Choose from Always on or
Manual.
MTU: Specify the MTU in bytes.
IPv6 DNS Settings
DNS Type: Specify the DNS Type. Choose from Obtain a DNS server
address automatically or Use the following DNS address.
Primary DNS
Server:
Enter the primary DNS IP address that will be assigned to DHCP
clients.
Secondary DNS
Server:
Enter the secondary DNS IP address that will be assigned to
DHCP clients.