D-Link DWR-932 User Manual (English)

Other manuals for D-Link DWR-932

User Manual115 pages

Quick Start Guide2 pages

Questions and Answers:

W
William MartinJul 27, 2025
How to reset D-Link Wireless Router DWR-932 to factory default settings?
- S
  Sharon KellerJul 27, 2025
  If you've forgotten your router's password or wireless network settings, you can reset your D-Link Wireless Router DWR-932 to its original factory settings. To do this, remove the battery cover and use a straightened paperclip (or similar object) to press and hold the reset button on the router for 5 seconds. Keep in mind that resetting the router will erase your current configuration settings.
M
Mary MillerAug 5, 2025
How to configure D-Link Wireless Router DWR-932 or check wireless network name (SSID) and wireless encryption key?
- S
  Sandra BaileyAug 5, 2025
  To configure your D-Link Wireless Router DWR-932 or check your wireless network name and wireless encryption key, power on the DWR-932 and connect it to your PC using the MicroUSB cable. Open a web browser and go to http://192.168.0.1. Log in with the username 'admin' and leave the password field blank. Once you're logged in, you can view or change the wireless network name and password. If you have changed the password and cannot remember it, you will need to reset the router to factory defaults.
J
Joshua MoralesAug 16, 2025
Why am I unable to connect to my D-Link Wireless Router mobile internet service?
- A
  Andrea WilliamsAug 16, 2025
  If you're unable to connect to your mobile internet service with your D-Link Wireless Router, make sure the SIM card is correctly installed and has 4G/3G data service. Also, verify that antivirus software isn't blocking the connection and that you're not connected to other internet sources.