D-Link Eagle Pro Al R12 - Page 118

113D-Link R12 User Manual
Section 7 - Troubleshooting
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar.
This should open the login page for the web conguration.
• If you still cannot access the web conguration, unplug the power to the router for 10 seconds and plug back in. Wait
about 30 seconds and try accessing the web conguration. If you have multiple computers, try connecting using a
dierent computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory
defaults.
To reset the router, locate the Reset button on the back panel of the unit. With the router powered on, press this button until
the Power LED turns orange. Release the button and the router will go through its reboot process. Wait about 30 seconds to
access the router. The default IP address is 192.168.0.1. When logging in, enter the default device password printed on the
device label.