D-Link Eagle Pro Al R12 - Wireless

53D-Link R12 User Manual
Section 3 - Conguration
Wireless
Go to Settings > Wireless to see your wireless network settings for your router.
Click Save at any time to save the changes you have made on this page.
Smart Connect
Status Enable or disable the Smart Connect Feature. The Smart
Connect feature presents a single wireless network. When
connecting clients to the network, the clients will be
automatically added to the best band, either 2.4 GHz or 5 GHz.
If Smart Connect is Enabled:
Wireless
Wi-Fi Name (SSID) Create a name for your wireless network. Up to 32 characters
are allowed.
Password Create a Wi-Fi password. Wireless clients will need to enter
this password (8-63 characters) to successfully connect to
the network.