D-Link Eagle Pro Al R12 - Network

60D-Link R12 User Manual
Section 3 - Conguration
Network
Go to Settings > Network to change the local network settings of the router and congure the DHCP settings.
Click Save at any time to save the changes you have made on this page.
Network Settings
LAN IP Address Enter the IP address of the router. The default IP address is
192.168.0.1. If you change the IP address, you will need to
enter the new IP address in your browser to log in to the web
conguration.
Subnet Mask Enter the subnet mask of the router. The default subnet mask
is 255.255.255.0.
Management Link The default address to access the router’s conguration is
http://R12-xxxx.local/ (where xxxx represents the last 4 digits
of your router's MAC address). You can replace R12-xxxx with
a name of your choice.
Local Domain Name Enter the domain name (optional).
Enable DNS Relay Disable this option to transfer the DNS server information
from your ISP to network clients for setting DNS server. If
enabled, network clients will then set the router's IP address
as the DNS server.