Note: If you did not run the setup wizard or you reset the router to its default settings, refer to
the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password.
You can also connect wireless devices to the DIR-882 router using WPS:
1. Press the WPS button on the DIR-882 for three seconds.
2. Within one minute press the WPS button on your wireless device.
3. Allow up to two minutes to connect.
Note: Some devices may require you to log in to a utility to start the WPS process. Refer to the user
manual of the device you want to connect to the router if you do not know how to start the WPS
process.
How do I change the wireless settings on the DIR-882 router?
1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter
http://dlinkrouter.local./ You can also enter the IP address of the router (http://192.168.0.1).
2. At the login screen, enter the router password you created in the wizard.
3. Go to Settings > Wireless to create a new Wi-Fi network name (SSID) and Wi-Fi password.
*Documentation available at:
United States: http://support.dlink.com/DIR-882
Canada: http://support.dlink.ca/DIR-882
GPL Code Statement
This D-Link product includes software code developed by third parties, including software code subject
to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As
applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and
LGPL Code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp
The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is
subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for
this product and the terms of the GPL and LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software, D-Link will provide
upon written request via email and/or traditional paper mail the applicable GPL and LGPL source code
files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL
and LGPL. Please direct all inquiries to:
Email: GPLCODE@dlink.com
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest user documentation
and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical
Support through our website.
United States
To Next Page
Loading...
Need help?
General
