Technical Support Setup Procedure
Page 1 of 3
How to setup and connect wireless to DWR-710?
Note:
By default, the network name(SSID) of the DWR-710 will be in the format
dlink_DWR_710_xxxx where “xxxx” represents the last 4 characters of the DWR-710’s MAC
Address.
Please find the default SSID and password on the product label after removing the front cover.
Please Write the password for later reference
Step 1 Ensure that the device has been properly inserted with an active SIM.
Step 2 - Connect the DWR-710 to an available USB port of a computer or a USB output power
device (eg Power Bank).
Step 3 - Ensure that the device is turned on and the desired SSID is found in the list of
Wireless Networks on your Wireless Computer. Please consult the computer operational
manual on enabling the Wireless connection of the computer.
To Next Page
Need help?
General
