EasyManua.ls Logo

D-Link DGS-3000-10TC User Manual

D-Link DGS-3000-10TC
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
`

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the D-Link DGS-3000-10TC and is the answer not in the manual?

D-Link DGS-3000-10TC Specifications

General IconGeneral
Product TypeManaged Switch
Power over Ethernet (PoE)No
Switching Capacity20 Gbps
Forwarding Rate14.88 Mpps
MAC Address Table Size16K
Weight2.5 kg
Jumbo Frame SupportYes
Storage Temperature-40 to 70 °C
Humidity10% to 90% (non-condensing)
Ports8 x 10/100/1000BASE-T ports 2 x 10G SFP+ ports

Summary

Introduction to the DGS-3000 Series

Intended Audience and Conventions

Defines the intended readers, typographical conventions, and important notes, notices, and cautions for the manual.

Safety Instructions and Precautions

Covers essential safety instructions, general precautions for rack mounting, and protection against electrostatic discharge.

Switch Overview and Components

Details the DGS-3000 Series switch features, ports, front/rear/side panels, and LED indicators.

Hardware Installation Procedures

Package Contents and Installation Guidelines

Lists package contents and provides general guidelines for setting up the switch.

Mounting the Switch

Guides on installing the switch without a rack and attaching mounting brackets.

Rack Mounting and Power On

Details mounting the switch in a standard rack and powering on the device.

DC Power and Alarm Connector

Covers connecting a DC power supply and the alarm connector for specific models.

Power Cord Clip and Port Installation

Details installing the power cord clip and SFP/SFP+ ports on the switch.

RPS Connection and Chassis Installation

Guides on connecting the DPS-200 to the RPS port and installing it into rack-mount chassis.

Network Connectivity

Connecting Network Devices

Explains how to connect the switch to end nodes, other switches, and network backbones or servers.

Switch Management

Management Options and Console Setup

Outlines management methods, console port connection, and initial setup for accessing the switch.

Configuration Settings

Covers password protection, IP address assignment, SNMP settings, traps, and MIBs for switch management.

Web-based Configuration

Accessing the Web Manager Interface

Details how to log into the web manager, navigate the user interface, and access web pages for configuration.

Appendices

Technical Specifications

Provides detailed technical specifications including standards, protocols, port details, power, and performance metrics.

Cables and Connectors

Details pin assignments for Ethernet, Console, and RPS cables, and supported transceivers and DACs.

Warranty and Support Information

Limited Warranty Details

Explains the terms of the limited warranty, claim submission process, exclusions, and liability limitations.

Technical Support Contacts

Provides contact information and resources for technical support across various global regions and languages.

Related product manuals