DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide
7
Side Panel Description
The system heat vents located on each side dissipate heat. Do not block these openings. Leave at least 6 inches of
space at the rear and sides of the Switch for proper ventilation. Be reminded that without proper heat dissipation and
air circulation, system components might overheat, which could lead to system failure or even severely damage
components.
Figure 1-10 Identical side panels of the DGS-3000-10TC
Figure 1-11 Identical side panels of the DGS-3000-24TC
Figure 1-12 Identical side panels of the DGS-3000-26TC
To Next Page
Loading...
