Need help?Do you have a question about the D-Link DGS-1210-16 and is the answer not in the manual?
General| Switching Capacity | 32 Gbps |
|---|---|
| Forwarding Rate | 23.8 Mpps |
| MAC Address Table | 8K entries |
| Dimensions | 440 x 180 x 44 mm |
| Jumbo Frame | 9, 216 Bytes |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Management | Web-based, CLI, SNMP |
| Power Supply | Internal |
| Ports | 16 x 10/100/1000BASE-T ports 2 x Gigabit SFP ports |
Explains terminology used throughout the manual.
Provides legal information and lists registered trademarks.
Details the energy-saving innovations of the DGS-1210 series.
Highlights key Layer 2 functionalities like IGMP snooping and Spanning Tree.
Describes VLAN support and Quality of Service features for traffic management.
Covers security measures like Safeguard Engine and 802.1X authentication.
Introduces management via SmartConsole Utility and Web-based interface.
Describes the front and rear panel components of the 16-port model.
Describes the front and rear panel components of the 24-port model.
Describes the front and rear panel components of the 48-port model.
Instructions for unpacking the switch and verifying all included items.
Guidance on safe desktop or rack installation of the switch.
Steps for connecting the AC power cord to the switch.
Overview of Web-based and SmartConsole utility management methods.
Steps to connect to, log into, and use the web interface.
Detailed instructions for installing the SmartConsole utility.
Configuring utility settings and viewing device list.
Viewing and clearing system log and trap messages.
Options for saving and loading device list settings.
Accessing device settings, password manager, and firmware upgrade features.
Explains the information displayed in the Device List.
Smart Wizard, password settings, system settings, SNMP, and logs.
VLANs, Link Aggregation, IGMP Snooping, Port Mirroring, Power Saving, Loopback Detection.
QoS settings, Storm Control, Bandwidth Control, and various security features.
Port statistics, cable diagnostics, system logs, and Access Control Lists.
Steps to establish and log into a Telnet CLI session.
Overview and syntax for common CLI commands like download and upload.
CLI commands for ping, reboot, reset, and showing system information.
Explains Ethernet, Fast Ethernet, and Gigabit Ethernet technologies.
Details on hardware, environment, certifications, and switch features.
Precautions for safely installing the switch in a rack.
To Next Page
