5 Configuration D-Link Web Smart Switch User Manual
SNMP Settings
The SNMP Setting allows you to quickly enable/disable the SNMP function and configure the SNMP
community name. For the complete SNMP function, please check “Setup Menu > System > SNMP Settings”
in the Web Interface. The default SNMP Setting is Disabled. Click Enabled, enter Community names, and
then click Apply to make it effective.
Read_Only Community: Read-only privilege allows authorized management stations to retrieve MIB
objects values. Default Community name is public.
Read_Write Community Read/write privilege allows authorized management stations to retrieve and modify
MIB object values. Default Community name is private.
Figure 28 – Configure SNMP in Smart Wizard
20
To Next Page
Loading...
