Need help?Do you have a question about the D-Link DGS-1210-48 and is the answer not in the manual?
General| Switching Capacity | 104 Gbps |
|---|---|
| MAC Address Table Size | 16K |
| RAM | 128 MB |
| Switch Type | Managed |
| Power over Ethernet (PoE) | No |
| Jumbo Frame Support | Yes |
| Spanning Tree Protocol (STP) | Yes |
| Rapid Spanning Tree Protocol (RSTP) | Yes |
| Multiple Spanning Tree Protocol (MSTP) | Yes |
| IGMP Snooping | Yes |
| Energy Efficient Ethernet (EEE) | Yes |
| Humidity | 5% to 95% non-condensing |
| Certifications | CE, FCC, RoHS |
| Ports | 48 x 10/100/1000BASE-T |
| Jumbo Frame | 9KB |
| VLAN Support | Yes |
| Quality of Service (QoS) | Yes |
| Link Aggregation | Yes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Input Voltage | 100 to 240 VAC, 50/60 Hz |
| Features | VLAN, IGMP Snooping |
Provides essential safety guidelines to prevent injury and equipment damage during installation.
Covers unpacking, desktop/rack mounting, and power cord connection steps.
Guides on connecting to the switch and logging into the web interface.
Guides users through initial switch configuration via the Smart Wizard utility.
Overview of the main UI areas: Tool Bar, Function Tree, and Main Configuration Screen.
Configure IP, system info, ports, DNS, DHCP, logging, time, and power saving settings.
Configure 802.1Q, Voice VLAN, and Auto Surveillance VLAN for network segmentation.
Prioritize traffic based on 802.1p, DSCP, ToS, port, or IP/TCP/UDP settings.
Implement security measures like Trusted Host, Port Security, SSH, ACL, and Smart Binding.
To Next Page
