Need help?Do you have a question about the D-Link DGS-1210-08P and is the answer not in the manual?
Lists precautions for safe installation and handling of the equipment.
Covers desktop, shelf, and rack installation procedures for safe operation.
Explains how to properly connect the switch to a protective ground.
Steps for connecting to and logging into the web-based management interface.
Guides through initial settings: Web Mode, IP Information, Password, and SNMP.
Guides through basic settings: Web Mode, IP Information, Password, and SNMP.
Configure system settings, IP, DNS, DHCP, Time, and Power Saving.
Implement security measures like Trusted Host, Port Security, ACL, and SSH.
Lists precautions for safe installation and handling of the equipment.
Covers desktop, shelf, and rack installation procedures for safe operation.
Explains how to properly connect the switch to a protective ground.
Steps for connecting to and logging into the web-based management interface.
Guides through initial settings: Web Mode, IP Information, Password, and SNMP.
Guides through basic settings: Web Mode, IP Information, Password, and SNMP.
Configure system settings, IP, DNS, DHCP, Time, and Power Saving.
Implement security measures like Trusted Host, Port Security, ACL, and SSH.
General| Ports | 8 |
|---|---|
| PoE Ports | 8 |
| Switching Capacity | 16 Gbps |
| Forwarding Capacity/Rate | 11.9 Mpps |
| MAC Address Table Size | 8K |
| Jumbo Frame | 9KB |
| Storage Temperature | -40°C to 70°C |
| Humidity | 0% to 95% (non-condensing) |
| Power Supply/Input | AC 100~240V, 50/60Hz |
To Next Page
