4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
2
2
9
9
Figure 4.17 – Tool Menu > Upload Nuclias Connect File
Select File: Select the specific DNC file for Nuclias Connect Network. This specific type of file was created
and saved via Nuclias Connect Network Profile which provided an easy method for device to rejoin the DNC.
Flash Information
This page displays the flash detail information of the Switch.
Figure 4.16 – Tool Menu > Flash Information
Tool Bar > Wizard
By clicking the Wizard button, you can return to the Smart Wizard if you wish to make any changes there.
Tool Bar > Online Help
The Online Help provides two ways of online support: D-Link Support Site will lead you to the D-Link
website where you can find online resources such as updated firmware images; User Guide can offer an
immediate reference for the feature definition or configuration guide.
Figure 4.18 – Online Help
Tool Bar > Surveillance Mode
By clicking the Surveillance Mode button to access the Surveillance Mode Web UI on the Switch. After
clicking the Surveillance Mode option in the Toolbar, the following pop-up window will appear.
Figure 4.19 – Survillance Mode Confirmation Message
The pop-up message window above displays a message that mentioned configurations need to be changed
when access to the Surveillance Mode is given.
Click the OK button to continue.
Click the Cancel button and return to the Standard Mode.
To Next Page
Loading...
