4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
80
Figure 4.100 – L3 Functions > ARP > ARP Table Global Settings
Global Settings:
ARP Aging Time (0-65535): Specifies the ARP entry age-out time, in minutes. The default is 5 minutes.
Interface Name: Enter or view the Interface name used.
IP Address: Enter or view the IP Address used.
MAC Address: Enter or view the MAC address used.
Click the Search button to locate a specific entry based on the information entered.
Click the Select All button to
Click the Clear button to remove the entry listed in the table.
L3 Functions > ARP > Static ARP Settings
The Address Resolution Protocol is a TCP/IP protocol that converts IP address into physical addresses. The
table allows network managers to view, define, modify, and delete ARP information for specific devise. Static
entries can be defined in the ARP table. When static entries are defined, a permanent entry is entered and is
used to translate IP addresses to MAC addresses.
To Next Page
Loading...
