4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
26
Figure 4.12 – Tool Menu > Reset System
Reboot Device
Provide a safe way to reboot the system. Select YES or NO to save the current settings before action. And
click Reboot to restart the switch.
Figure 4.13 – Tool Menu > Reboot Device
Configuration Backup and Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from this file. Two methods can be selected: HTTP or TFTP.
Figure 4.14 – Tool Menu > Configure Backup and Restore
HTTP: Backup or restore the configuration file to or from your local drive.
Backup/Restore Config ID Number: Select config_id 1 or config_id 2.
Click Backup to save the current settings to your disk.
Click Choose File to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
TFTP: TFTP (Trivial File Transfer Protocol) refers to the file transfer protocol that provides user a quick and
convenient method for file transfer.
Selectable TFTP server IP address mode from IPv4 address, IPv6 address or Domain Name.
Click Backup to save the current settings to the TFTP server.
Click Restore after selecting the backup settings file you want to restore.
Note: Switch will reboot after restore, and
all current configurations will be lost.
To Next Page
Loading...
