5 Surveillance Mode Configuration D-Link Smart Managed Switch User Manual
1
1
3
3
3
3
The fields that can be configured for SNTP Server Settings are described below:
Parameter Description
SNTP First Server Select to enter the IPv4 or IPv6 address for SNTP first server.
SNTP Second Server Select to enter the IPv4 or IPv6 address for SNTP second server.
Click the Apply button to add the SNTP server to the configuration.
Surveillance Settings
The Surveillance Settings page allows user to configure the settings for the Surveillance VLAN. This is a
VLAN dedicated for IP-Camera (IPC) and Network Video Recorders (NVR), and also can be used to manage
surveillance devices on the network.
Figure 5.14 – Surveillance Mode > Surveillance Settings
The fields that can be configured for the Surveillance Settings are described below:
Parameter Description
VLAN ID (2-4094)
Specifies a VLAN ID for the surveillance VLAN in the range between 2
and 4094.
Click the Apply button to implement changes made.
The fields that can be configured for the IP Settings are described below:
Parameter Description
Get IP From
Specifies how the management IP for this VLAN is assigned to the
switch. Options are: Static, DHCP or BOOTP. If Static is chosen, the
following fields become available.
IP Address Specifies the IP address for the surveillance VLAN management IP.
To Next Page
Loading...
