4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
3
3
7
7
Figure 4.27 – System > Port Description
From Port / To Port: Specifies the range of ports to describe.
Description: Specifies the description for the chosen ports.
Click Apply to set the description in the table.
System > DNS Resolver > DNS Resolver Global Setting
DNS resolver helps to query the IP address via domain name. This page contains the global setting for DNS
resolver function.
Figure 4.28 – System > DNS Resolver > DNS Resolver Global Setting
DNS Resolver State: Globally Enable/Disable DNS resolver function by selecting from drop-down list. The
default value is Enabled.
Name Server Timeout: Configurable timeout period from 1-60 seconds. This time period refers to the time
range waiting for a response from DNS name server.
System > DNS Resolver > DNS Resolver Static Name Server Settings
The specific DNS Name Server may be configured in this page.
Figure 4.29 – System > DNS Resolver > DNS Resolver Static Name Server Settings
Server IP Address: The specific DNS name server IP address can be configured in the field. The switch
supports up to 3 server IP addresses.
System > DNS Resolver > DNS Resolver Dynamic Name Server Table
This page contains the DNS dynamic name server list .
To Next Page
Loading...
