D-Link DGS-1210-08P - VLAN > 802.1 Q VLAN PVID

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
4
4
7
7
Figure 4.47 – Configuration > 802.1Q VLAN > Add VID
After click Apply, the 802.1Q VLAN Configuration Table will displayed with updates.
Figure 4.48 – Configuration > 802.1Q VLAN > Add VLAN
Click the VID number, the configuration of VLAN group which selected by user will displayed.
Change the port assignment then click Apply to implement changes made.
Figure 4.49 - Configuration > 802.1Q VLAN > VID Assignments
VLAN > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. Click Apply to implement
changes made.
Figure 4.50 – Configuration > 802.1Q VLAN PVID