D-Link DGS-1210-08P - Tool Bar > Save; Tool Bar > Help

5 Surveillance Mode Configuration D-Link Smart Managed Switch User Manual
1
1
3
3
9
9
Figure 5.24 – Surveillance Mode > Tools Menu > Flash Information
Tool Bar > Save
Select to save the entire configuration changes to configuration ID 1 or 2 you have made to the device to
switch’s non-volatile RAM. Or save the log entries to your local drive and a pop-up message will prompt you
for the file path. You can view or edit the log file by using text editor (e.g. Notepad).
Figure 5.25 – Surveillance Mode > Save
Specifies the configuration ID 1 or 2 to be saved and click the Save Config button to implement changes
made.
Click the Backup Log button to save the current settings to your disk.
Tool Bar > Help
By clicking the Wizard button to access the built-in Surveillance Help window.
Figure 5.26 – Surveillance Mode > Help - Diagram