4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
5
5
1
1
Click the Apply button to implement changes made.
VLAN > Auto Surveillance VLAN > MAC Settings and Surveillance Device
Similar as Voice VLAN, Auto Surveillance VLAN is a feature that allows you to automatically place the video
traffic from D-Link IP cameras to an assigned VLAN to enhance the IP surveillance service. With a higher
priority and individual VLAN, the quality and the security of surveillance traffic are guaranteed. The Auto
Surveillance VLAN function will check the source MAC address / VLAN ID on the incoming packets. If it
matches specified MAC address / VLAN ID, the packets will pass through switch with desired priority.
Figure 4.55 – VLAN > Auto Surveillance VLAN > MAC Settings and Surveillance Device
User-defined MAC Settings:
Component Type: Auto Surveillance VLAN will automatically detect D-Link Surveillance Devices by default.
There are another five surveillance components that could be configured to be auto-detected by the Auto
Surveillance VLAN. These five components are Video Management Server (VMS), VMS Client/Remote
viewer, Video Encoder, Network Storage and Other IP Surveillance Devices.
Description: Here to input the description for the component type.
MAC Address: User can manually create an MAC or OUI address for the surveillance component. The
maximum number of user defined MAC address is 5.
Mask: Specifies the mask address for the MAC or OUI.
Click Add to create a new surveillance component and Refresh to refresh the Auto Surveillance VLAN
summary table.
VLAN > Auto Surveillance VLAN > ONVIF IPC Information
The ONVIF IPC Information page displays the information on each IP camera connected to the switch.
Including the port number, IP address, MAC address, throughput and other information such as port
description and model name.
To Next Page
Loading...
