4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
6
6
3
3
MLD Snooping VLAN Settings List:
Click the number of VLAN ID to modify the settings:
Figure 4.72 – L2 Functions > Multicast > Multicast Forwarding
State: Specifies the state of MLD Snooping VLAN to be enabled or disabled.
Querier State: Specifies the querier state to be enabled or disabled.
Fast Leave: Specifies the fast leave feature to be enabled or disabled.
Click Apply to implement changes made.
Static Router Ports: Selects the ports to be static router ports and assigned for MLD snooping for the VLAN.
Dynamic Router Ports: Select the ports to be dynamic router ports and assigned for MLD snooping for the
VLAN.
Click the Apply button to implement changes made.
L2 Functions > Multicast > Multicast Forwarding
The Multicast Forwarding page displays all of the entries made into the Switch’s static multicast forwarding
table. To implement the Multicast Forwarding Settings, input VID, Multicast MAC Address and port settings,
then click Add.
Figure 4.73 – L2 Functions > Multicast > Multicast Forwarding
VID: The VLAN ID of the VLAN to which the corresponding MAC address belongs.
Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
To Next Page
Loading...
