4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
78
Figure 4.95 – L3 Functions > IPv4 Static Route – Add
The new entry will be displayed in the IPv4 static route table:
Figure 4.96 – L3 Functions > IPv4 Static Route – Static Route Table
Click the Delete button to remove the entry.
L3 Functions > IPv4 Routing Table Finder
The IPv4 Routing Table Finder page shows the current IPv4 routing table of the Switch. To find a specific
IPv4 route, enter and IPv4 address into the Network Address field and click the Search button.
Figure 4.97 – L3 Functions > IPv4 Routing Table Finder
L3 Functions > IPv6 Static Route
The IPv6 Static Route page allows user to enable and configure the IPv6 route settings.
Figure 4.98 – L3 Functions > IPv6 Static Route
IPv6 Static Route: Specifies to enable or disable the IPv6 static route feature on the Switch.
To Next Page
Loading...
