Need help?Do you have a question about the D-Link DXS-3326GSR and is the answer not in the manual?
General| Model | DXS-3326GSR |
|---|---|
| MAC Address Table Size | 16K |
| Humidity | 10% to 90% non-condensing |
| Layer | Layer 3 |
| Type | Layer 3 Stackable Gigabit Ethernet Switch |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions | 440 x 250 x 44 mm (17.3 x 9.8 x 1.7 inches) |
| Power Consumption | 45 Watts (maximum) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40 to 70 °C |
| Jumbo Frame Support | Up to 9216 bytes |
Explains switch stacking capabilities, topologies, and limitations.
Using a web browser for switch configuration and monitoring.
Accessing the switch for management via CLI through a serial port.
Setting up user accounts and passwords for secure access.
Procedures for assigning an IP address to the switch for network management.
Steps to access the switch's web interface for management.
Configuring the switch's IP address, subnet mask, and default gateway.
Setting speed, duplex, flow control, and learning parameters for switch ports.
Configuring STP, RSTP, and MSTP protocols for network loop prevention.
Understanding and configuring Virtual LANs for network segmentation.
Configuring QoS for traffic prioritization and bandwidth management.
Configuring the Open Shortest Path First routing protocol.
General guidelines for safe operation and handling of the network device.
To Next Page
