DXS-3326GSR Gigabit Layer 3 Switch
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
UDP Port (514 or
6000-65535)
Type the UDP port number used for sending Syslog messages. The default is 514.
Status
Choose Enabled or Disabled to activate or deactivate.
To set the System Log Server configuration, click Apply. To delete an entry from the Current System Log Servers
window, click the corresponding
under the Delete heading of the entry you wish to delete. To return to the Current
System Log Servers window, click the Show All System Log Servers link
.
SNTP Setting
Time Setting
To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder and click on the
Current Time Setting link, revealing the following window for the user to configure.
92
To Next Page
Loading...
