DXS-3326GSR Gigabit Layer 3 Switch
1024-1518
The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including FCS
octets).
Show/Hide
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and
1024-1518 packets received.
View Table Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart Clicking this button instructs the Switch to display a line graph rather than a table.
Stacking Information
To change a switch’s default stacking configuration (for example, the order in the stack), see Box Information in the
Configuration folder.
The number of switches in the switch stack (up to 12 total) are displayed in the upper right-hand corner of your web-
browser. The icons are in the same order as their respective Unit numbers, with the Unit 1 switch corresponding to the icon
in the upper left-most corner of the icon group.
When the switches are properly interconnected through their optional Stacking Modules, information about the resulting
switch stack is displayed under the Stack Information link.
To view the stacking information, click on the Stacking Information link from the Monitoring folder:
Figure 10- 1 . Stacking Information window 5
The Stacking Information window holds the following information:
Parameters Description
Box ID
Displays the Switch’s order in the stack.
216
To Next Page
Loading...
