DXS-3326GSR Gigabit Layer 3 Switch
Figure 12- 1 . Firmware Upgrade window 9
Configuration File Backup/Restore
This window is used to both backup and restore configuration files from the Commander Switch to the Member Switch
using a TFTP server. Member Switches will be listed in the table and will be specified by Port (port on the CS where the
MS resides), MAC Address, Model Name and Version.
Figure 12- 2 . Configuration File Backup/Restore window 0
To specify a certain Switch for upgrading configuration files, click its corresponding radio button under the Port heading.
To update the configuration file, enter the Server IP Address where the file resides and enter the Path/Filename of the
configuration file. Click Download to initiate the file transfer from a TFTP server to the Switch. Click Upload to backup
the configuration file to a TFTP server.
260
To Next Page
Loading...
