D-Link DXS-3326GSR - SNMP View Table

DXS-3326GSR Gigabit Layer 3 Switch
has been checked. This field will require the user to enter a password.
SHA - Specifies that the HMAC-SHA authentication protocol will be used. This field is
only operable when V3 is selected in the SNMP Version field and the Encryption field
has been checked. This field will require the user to enter a password.
Priv-Protocol
None - Specifies that no authorization protocol is in use.
DES - Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-
56) standard. This field is only operable when V3 is selected in the SNMP Version
field and the Encryption field has been checked. This field will require the user to
enter a password between 8 and 16 alphanumeric characters.
Encrypted
Checking the corresponding box will enable encryption for SNMP V3 and is only oper-
able in SNMP V3 mode.
To implement changes made, click Apply. To return to the SNMP User Table window, click the Show All SNMP User
Table Entries link.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a
remote SNMP manager. To view the SNMP View Table window, open the SNMP Manager folder under Security
Management and click the SNMP View Table entry. The following screen should appear:
Figure 9- 4. SNMP View Table window
To delete an existing SNMP View Table entry, click the
in the Delete column corresponding to the entry you wish to
delete. To create a new entry, click the Add button and a separate window will appear.
195