DXS-3326GSR Gigabit Layer 3 Switch
NOTE: Only the Reset System option will enter the factory default
parameters into the Switch’s non-volatile RAM, and then restart the
Switch. All other options enter the factory defaults into the current
configuration, but do not save this configuration. Reset System will
return the Switch’s configuration to the state it was when it left the
factory
2Figure 11- 1 . Factory Reset to Default Value window
Reboot Device
The following window is used to restart the Switch.
Figure 11- 1 . Restart System window 3
Clicking the Yes click-box will instruct the Switch to save the current configuration to non-volatile RAM before restarting
the Switch.
Clicking the No click-box instructs the Switch not to save the current configuration before restarting the Switch. All of the
configuration information entered from the last time Save Changes was executed will be lost.
Click the Restart button to restart the Switch.
246
To Next Page
Loading...
