DXS-3326GSR Gigabit Layer 3 Switch
The following field can be viewed:
Parameter Description
VLAN Name
The VLAN Name of the multicast group.
Source IP
The Source IP address of the multicast group.
Multicast Group
The IP address of the multicast group.
Port Map
These are the ports where the IP multicast packets are forwarding to.
Browse Router Port
This displays which of the Switch’s ports are currently configured as router ports. A router port configured by a user (using
the console or Web-based management interfaces) is displayed as a static router port, designated by S. A router port that is
dynamically configured by the Switch is designated by D.
Figure 10- 2 . Browse Router Port window 1
Port Access Control
The following windows are used to monitor 802.1x statistics of the Switch, on a per port basis. To view the Port Access
Control windows, open the Monitoring folder and click the Port Access Control folder.
Authenticator State
The following section describes the 802.1X Status on the Switch. To view the Authenticator State, click Monitoring >
Port Access Control > Authenticator State.
222
To Next Page
Loading...
