D-Link DXS-3326GSR - CPU Utilization

DXS-3326GSR Gigabit Layer 3 Switch
Time Interval
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Record Number
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Show/Hide
Check whether to display Utilization.
Click Apply to set changes implemented.
CPU Utilization
The CPU Utilization window displays the percentage of the CPU being used, expressed as an integer percentage and
calculated as a simple average by time interval. To view this window, open the Monitoring folder and click the CPU
Utilization link.
Figure 10- 2. CPU Utilization window
Click Apply to implement the configured settings. The window will automatically refresh with new updated statistics
The information is described as follows:
Parameter Description
Time Interval
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Record Number
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Show/Hide
Check whether to display Utilization.
203