D-Link DXS-3326GSR - Layer 3 Feature; Browse IP Address

DXS-3326GSR Gigabit Layer 3 Switch
Timeouts
The number of accounting timeouts to this server. After a timeout the client may retry
to the same server, send to a different server, or give up. A retry to the same server is
counted as a retransmit as well as a timeout. A send to a different server is counted
as an Accounting-Request as well as a timeout.
UnknownTypes
The number of RADIUS packets of unknown type that were received from this server
on the accounting port.
PacketsDropped
The number of RADIUS packets, which were received from this server on the
accounting port and dropped for some other reason.
Note: To configure 802.1x features for the DXS-3326GSR, go to the
Configuration folder and select Port Access Entity. Configuration and
other information concerning 802.1x may be found in Section 6 of this
manual under Port Access Entity.
Layer 3 Feature
This folder in the Monitoring section will display information concerning settings configured in Layer 3 IP Networking
of the Configuration folder.
Browse IP Address
The IP Address Table window may be found in the Monitoring menu in the Layer 3 Feature folder. The IP Address
Table window is where the user may view IP addresses discovered by the Switch. To search a specific IP address, enter it
into the field labeled IP Address at the top of the window and click Find to begin your search.
232