D-Link DXS-3326GSR - RADIUS Server

DXS-3326GSR Gigabit Layer 3 Switch
PortStatus
The status of the controlled port can be Authorized, Unauthorized, or N/A.
RADIUS Server
The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection
against a sniffing, active hacker. The Web Manager offers three windows.
Click Port Access Entity > RADIUS Server > Authentic RADIUS Server to open the following window shown below:
Figure 6- 76. Authentic RADIUS Server Setting window
This window displays the following information:
Parameter Description
Succession <First>
Choose the desired RADIUS server to configure: First, Second or Third.
RADIUS Server
<0.0.0.0>
Set the RADIUS server IP.
Authentic Port
<1812>
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port
<1813>
Set the RADIUS account server(s) UDP port. The default port is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Status
This allows you to set the RADIUS Server to Valid or Invalid.
120