DXS-3326GSR Gigabit Layer 3 Switch
log)
Save All (Save config
and log)
Clicking the radio button for this entry will save both the current switch configuration
and the current log file to NV-RAM.
Once the Switch configuration settings have been saved to NV-RAM, they become the default settings for the Switch, and
one of the following three windows will appear depending on which option you choose in the Save Settings window.
Figure 11- 9. Save Settings window (only save configuration)
Figure 11- 1 . Save Settings window (only save log) 0
Figure 11- 1 . Save Settings window (save configuration and log) 1
These settings will be used every time the Switch is rebooted. See the Reset section for more information on changing
configurations saved to NV-Ram.
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be
retained while resetting all other configuration parameters to their factory defaults.
245
To Next Page
Loading...
