DXS-3326GSR Gigabit Layer 3 Switch
Figure 9- 5. SNMP View Table Configuration window
The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table window) to the views
created in the previous window.
The following parameters can set:
Parameter Description
View Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP view being created.
Subtree OID
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree
(MIB tree) that will be included or excluded from access by an SNMP manager.
View Type
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
To implement your new settings, click Apply. To return to the SNMP View Table window, click the Show All SNMP
View Table Entries link.
SNMP Group Table
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous window. To view the SNMP Group Table window, open the SNMP Manager folder and click the SNMP
Group Table entry. The following window should appear:
Figure 9- 6. SNMP Group Table window
To delete an existing SNMP Group Table entry, click the corresponding
under the Delete heading.
196
To Next Page
Loading...
