6
DNR-202L Install Guide
10
11
The wizard will scan for all available cameras attached to your network.
Registered mydlink cameras will be veried automatically. Click Rescan if
you are adding more cameras.
You can preview the discovered cameras by clicking on the blue camera
icon, or click Next to continue.
A pop-up will ask you to enter the password for your camera.
Click OK.
The checkbox next to your camera will now have a green check mark to
indicate it has been added successfully.
Click Next to continue.
If you want to add any additional cameras in the future, refer to the “Adding a
Camera to the NVR” section.
To Next Page
Loading...
