D-Link NUCLIAS CONNECT DAP-X2850 - Wireless Client Mode

17D-Link DAP-X2850 User Manual
Section 3 - Conguration
Wireless Band:
Mode:
Network Name (SSID):
SSID Visibility:
Auto Channel Selection:
Channel:
Channel Width:
Site Survey:
Authentication:
Select either 2.4 GHz or 5 GHz from the drop-down
menu.
Wireless Client is selected from the drop-down menu.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN). The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network.
This option is unavailable in Wireless Client mode.
This option is unavailable in Wireless Client mode.
This option is unavailable in Wireless Client mode.
This option is unavailable in Wireless Client mode.
Click on the Scan button to search for available
wireless networks, then click on the available network
that you want to connect with.
Use the drop-down menu to choose Open System
or WPA-Personal.
• Select Open System to communicate the key across
the network.
• Select WPA-Personal to secure your network using
a password and dynamic key changes. No RADIUS
server is required.
Wireless Client Mode