D-Link NUCLIAS CONNECT DAP-X2850 - Traffic Control; Uplink;Downlink Setting

62D-Link DAP-X2850 User Manual
Section 3 - Conguration
Trac Control
The uplink/downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink/uplink bandwidth rates
in Mbits per second. These values are also used in the QoS and Trac Manager windows. Once the desired uplink and downlink settings are
nished, click the Save button to let your changes take eect.
Downlink Bandwidth:
Uplink Bandwidth:
Save:
The downlink bandwidth in Mbits per second.
The uplink bandwidth in Mbits per second.
Click to save the updated configuration.
To make the updates permanent, click
Conguration > Save and Activate.
Uplink/Downlink Setting