2D-Link DHP-700AV User Manual
D-Link reserves the right to revise this publication and to make changes to the content herein without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2015 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation, Inc.
Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a
power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain
periods of time, it can be unplugged to save energy.
Network Standby mode: 3.69W
Revision Date Description
1.0 March 16, 2015 • Hardware revision A1
Preface
To Next Page
Loading...
