D-Link ShareCenter DNS-320 Quick Installation Guide

DNS-320

ENGLISH
System Requirements
• Computer with: 1GHz processor/512 MB RAM/200 MB available disk
space/CD ROM drive
• Internet Explorer version 6.0 or Mozilla Firefox 1.0 and above
• 3.5” SATA Hard Drive(s)
• Windows® 7, Vista®, or XP (with Service Pack 2)
What This Product Does
The D-Link DNS-320 ShareCenter
TM
Pulse 2-Bay Network Storage shares
your documents, photos, music, and videos across the network and on the
Internet so family members, friends, or employees can access them. This
ShareCenter
TM
Pulse can hold two 3.5” SATA hard drives and is able to create
a central network point for backing up valuable les.
Installation - Windows Only
The Setup Wizard on the CD-ROM will give you step-by-step instructions
how to connect, install, and congure your DNS-320.
Step 1:
Insert the supplied CD-ROM into your computer. When the autorun screen
appears, click ShareCenter
TM
Pulse Setup Wizard.
Step 2:
Follow the on-screen instructions. Once complete you can log into the DNS-
320 for advanced conguration.
Installation - Non-Windows/Manual Installation
For Mac or Linux users, or for manual installation, follow the steps below:
Step 1:
Remove the top cover of your device by moving the cover lock located on
the back of your device and moving the cover lock to the right.
Step 2:
While holding the cover lock, slide the top cover backwards. After sliding the
top cover backwards, lift the top cover up to remove it.
Step 3:
Insert a 3.5” SATA hard drive into an available drive bay. Then, re-attach the
top cover.

D-Link ShareCenter DNS-320 Specifications

General

Device Type	NAS server
Drive Bays	2
Connectivity	Gigabit Ethernet
USB Ports	1 x USB 2.0
Supported Drive Types	SATA I/II
RAM	128 MB
RAID Support	JBOD, RAID 0, RAID 1
Features	FTP Server
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing