Need help?Do you have a question about the D-Link MYDLINK DNR-322L and is the answer not in the manual?
Power| power adapter | DC 12V/4 A |
|---|---|
| max power consumption | 25.20 W |
| standby state max power consumption | 0.23 W |
Operating Environment| operating temperature | 0˚ to 55˚ C (32˚ to 131˚ F) |
|---|---|
| storage temperature | Operating: 5% to 90% (non-condensing) |
Memory| flash rom | 128 MB |
|---|---|
| ram | 256 MB DDR II |
Weight and Dimensions| dimension | 4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm) |
|---|---|
| weight | 0.875 kg (1.93 lbs) |
Procedure for installing hard drives into the NVR.
Powering on the NVR and selecting the device.
Setting the administrator password for the NVR.
Configuring storage and network drive mapping.
Initial steps to find and add network cameras.
Configuring the NVR for internet access.
Logging into the NVR's web interface.
Setting up and formatting the NVR's hard drives.
Automatically finding and adding cameras.
Configuring LAN settings and IP addresses.
Detailed steps for searching and adding cameras.
Modifying individual camera settings.
Setting up recording modes and schedules.
Detailed configuration for recording schedules.
Step-by-step setup for recording schedules.
Configuring events and associated actions.
Setting up email alerts for events.
Configuring the NVR's system time.
Creating and managing user accounts and privileges.
Managing existing user accounts.
Configuring hard drive RAID levels.
Updating the NVR's firmware.
Steps to search and play recorded video.
Detailed process for searching recorded videos.
Backing up video data to storage.
Procedure for replacing a faulty hard drive.
To Next Page
