D-Link MYDLINK DNR-322L User Manual

44D-Link DNR-322L User Manual
Section 3 - Conguration
E-mail Setup
Server Address:
Port:
Use SSL:
Sender:
Subject:
Body of Message:
SMTP
Authentication:
User Name:
Password:
Send Testing Mail:
SMTP (Simple Mail Transport Protocol) server IP
address.
Specify the port number of email server. default
number is 25.
Check this if your email server use SSL protocol.
Sender information.
The E-mail content.
The E-mail content.
Provide the user name and password to the SMTP
server for identication before sending E-mail.
Input the SMTP server login user name.
Input the SMTP server login user password.
Click this button and the system will send a test
mail to the sender. Please check it after testing.
Add Contacts
Step 1: Insert the name of a new contact.
Step 2: Insert the E-mail address of this new contact.
Step 3: Click the Add Contact button.
Step 4: Click the Save Settings button to save the new contact list.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)