D-Link MYDLINK DNR-322L User Manual

21D-Link DNR-322L User Manual
Section 3 - mydlink Portal
NVR Status
If your NVR is oine, try the following:
•ChecktomakesurethattheInternetconnectiontoyourNVRisworkingproperly.
•TryrestartingyourInternetrouter.
•CheckyourNVR’scableconnectionsandmakesuretheyaresecure.
•ChecktomakesurethattheLEDonyourNVRislitsolidblue.
If you still cannot access your NVR, reset your NVR and run the NVR Setup Wizard again from the CD-ROM included in your
package.
Here, you can see the online status of each of your NVRs. Your online status may be one of the following:
A green checkmark indicates that your NVR is online and ready to use.
A yellow exclamation point indicates that your NVR is online, but the NVR
password has changed. You will need to enter your new NVR password to
access your NVR again.
A red x indicates that your NVR is oine and currently cannot be accessed
remotely.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)