D-Link MYDLINK DNR-322L User Manual

18D-Link DNR-322L User Manual
Section 3 - Installation
Set up Internet connection
Setup Wizard will try to connect to the Internet.
Note:
If the NVR is not able to connect to the Internet, Setup Wizard will allow you to set up
the“PPPoE”or“StaticIP”forInternetconnection.(NeedtocontactyourISPforthesetup
details). If you don’t don’t have the Internet connection information right now, or you
don’t want to connect to the Internet, the Setup Wizard will guide you to go through the
“LocalAccess”processlater.
If the NVR is able to connect to the Internet, you will need to login to mydlink or create
a new mydlink account rst.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)