D-Link MYDLINK DNR-322L User Manual

25D-Link DNR-322L User Manual
Section 2 - Getting Started
YoucaninserttheCDandclick“NVRSearchUtility”torunanotherusefulsetuptool.Whenrstpoweredon,duringtheinitial
boot sequence, the device will wait to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP address
the Auto-IP process will assign a 169.254.xxx.xxx address to the device If you want to change the IP address before login in
or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on the product CD to locate the
device on your network and make any needed changes.
D-Link NVR Search Utility
Network Video
Recorder:
Refresh:
Conguration:
LAN:
Apply:
Drive Mapping:
Available Drive
Letters:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it detects on the
network.
Click to refresh the device list.
Click Conguration to access the Web-based conguration of the NVR.
Congure the LAN Settings for the NVR here.
Click Apply to save and activate the changes to the LAN Settings.
Volumes available for mapping are displayed here.
Select an available drive letter. Click Connect to map the selected volume.
Click Disconnect to disconnect the selected mapped volume.
Click About to view the software version of the NVR Search Utility.
Click Exit to close the utility.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)