D-Link MYDLINK DNR-322L - Event Setup

41D-Link DNR-322L User Manual
Section 3 - Conguration
Event Setup
Hard Disk
Space Full:
When the Overwrite function is not enabled,
NVR will stop recording when HDD full.
Step 1: Select the event below.
E-mail: If the event occurs, the system will send an
E-mail to the pre-set contacts.
Step 2: Click the Add button to setup the actions of
the event.
Step 3: Click the action, and then click the Congure
button to modify the details of that action if necessary.
Step 4: Repeat step 2 through 3 to add more actions.