D-Link MYDLINK DNR-322L User Manual

48D-Link DNR-322L User Manual
Section 3 - Conguration
If the NVR is malfunctioning or crashes
unexpectedly, click the Restart button on the
NVR. Restarting the NVR will take about one and
a half minutes.
This will reset all configurations to factory
default.
This will shutdown the NVR.
All the congurations can be saved as a le to
the specied location. Click the Save button to
save the le.
User can restore the conguration le after reset
to factory default le.
Click the Browse button to select the
conguration le and restore it by clicking the
Load button.
When adminstrator enter all the Setup pages,
except the Live Video and Playback Page, NVR
will count the idle time when user doesn’t has
any movement. it will force logout user and
request to login again for security concern.
Change the period of idle time here.
System
Restart:
Default:
Shutdown:
Save
Conguration:
Load
Conguration
File:
Idle Time:
Users can save the NVR conguration to a le and restore it when necessary. Ocassionally, restarting the NVR can keep the
system running smoothly. Reset the NVR to restore all congurations to factory default.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)