D-Link MYDLINK DNR-322L - Configuring the NVR

32D-Link DNR-322L User Manual
Section 3 - Conguration
BASIC OPERATION
You may run the wizard to congure the setup for your NVR. There are basic and advanced operations. You must rst congure
the basic operations in order to activate and utilize the features of our NVR.
Step 1: Camera Search - Search for a network camera using UPnP and add it to the NVR camera list.
Step 2: Recording Schedule - Congure a camera for recording and create a detailed schedule. Users can also simply choose
Always Record and select connected cameras.
After completing the above settings, the NVR will be fully functional.
ADVANCED OPERATION
Step 1: E-mail Setup - Congure the E-mail address and
messages for event notication.
Step 2: Event Setup - Congure event options with
various combinations. Events can be triggered in the
event of camera motion detection or full hard disk
warning. An event action can be congured to send
E-mail.
Conguring the NVR