10D-Link DNR-322L User Manual
Section 3 - Installation
Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program.
The CD-ROM will open the NVR Setup Wizard. Simply click Start to go through the Setup Wizard, which will guide you through
the installation process from connecting your hardware to conguring your NVR.
Installation
Setup Wizard
Note: The computer used to access the
NVR
web-based conguration manager must be on the same subnet as the NVR. If your network is using a DHCP
server, the
NVR
will automatically be in the same subnet.
To Next Page
Loading...
