D-Link MYDLINK DNR-322L User Manual

46D-Link DNR-322L User Manual
Section 3 - Conguration
Maintenance
Add New User
Step 1: Input the new user name.
Step 2: Input the password. Type the password again to
conrm.
Step 3: Select the live view cameras and PTZ/ IO Control
functions which this user can access.
Step 4: Select the playback channels and Backup Data
function which this user can access.
Step 5: Click the Finish button to create a new user.
Note
The Administrator account can congure all functions of the
NVR. This account cannot be deleted. The default password for
“admin”isblank.Settingapasswordaftertherstloginisstrongly
recommended. If the administrator password is lost, you may hold
the reset button on the rear panel of the device to reset the NVR
to factory defaults. Note: This will erase all the previously-saved
settings.
User Management

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)